In recent days, the spring rain, due to the humidity caused by the increase in odor inside the car, many people open the air conditioner and open the outer loop together, still feel a moldy smell. Auto repair personnel pointed out that many people's vehicles neat, but the car is still smell, and the reasons for the accumulation of dust and moldy pipes invisible. Among them, the air filter and the pipeline is often the culprit giant evil, some owners do not pay attention to air conditioning maintenance, and in a damp environment, and even the appearance of the air conditioner filter plush.

据了解，车主除了到4S店进行春季空调保养外，可自行整理空调的滤芯。车主依据运用环境，决议自行清洁次数，通常每隔3个月清洁一次即可。大多数家用轿车的空调滤芯坐落副驾驶席前挡风下的储物盒下方，拆开也非常便利。车主只需将储物盒取下，就能看见空调滤芯。值得一提的是，清洁空调滤芯，主张用刷子或高压气枪。

It is understood that, in addition to the owners of the 4S shop in the spring air conditioning maintenance, the air conditioning filter can be customized. Owners based on the use of the environment, the resolution of their own cleaning times, usually clean every 3 months. Most of the family car's air conditioning filter is located under the front seat of the wind box under the wind box, is also very convenient to open. Owners only need to take the storage box, you can see the air conditioning filter. It is worth mentioning that the clean air conditioning filter, advocated using a brush or high-pressure air gun.

此外，还应留意及时替换空调滤芯，通常1年或3万公里左右替换一次。但假如环境非常恶劣，1万公里就要替换一次。

In addition, we should also pay attention to the timely replacement of air conditioning filters, usually 1 or 30 thousand km or so to replace. But if the environment is very bad, 10 thousand km will be replaced once.

假如遇到阴雨气候，主张车主运用空调时，留意坚持空调管道清洁。车主可在泊车熄火后，将空调风机开至最大，吹个两三分钟，这么能有效削减空调管路中的湿气，削减霉菌的繁殖。

If you encounter a rainy climate, advocate the use of air conditioners, pay attention to adhere to air conditioning pipe cleaning. Owners can turn off the car after the parking, the air conditioning fan to open to the maximum, blowing two or three minutes, so that it can effectively reduce the moisture in the air conditioning pipeline, reducing mold reproduction.